Use And Maintenance; Wind Function; Wind And Rain Functions In Safety Mode - SOMFY Eolis io Notice

Masquer les pouces Voir aussi pour Eolis io:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
EN

3. USE AND MAINTENANCE

This product is maintenance-free and no maintenance operations should be performed on it.

3.1. WIND FUNCTION

3.1.1. The wind begins to blow
When the wind exceeds the set sensitivity threshold:
• The wind LED is permanently lit green,
• The motorised products connected to the Eolis  io sensor move to the safety position
automatically.
͉
͉
It is impossible to prevent the motorised products from reacting or to change their position while the
wind is blowing stronger than the threshold set.
3.1.2. The wind stops blowing
When the Eolis io sensor has not detected any wind for 30 seconds:
• The Wind LED goes off.
• It is then possible to control the motorised products in manual mode.
• All the automatic functions will remain locked for another 11 min 30 s.

3.2. WIND AND RAIN FUNCTIONS IN SAFETY MODE

Applicable if an Ondeis rain sensor is connected to the Eolis io sensor and safety mode is selected.
3.2.1. The wind begins to blow and/or it is raining
If the wind speed exceeds the sensitivity threshold set and/or the Ondeis rain sensor detects rain:
• The wind LED is permanently lit green,
• The motorised products connected to the Eolis  io sensor move to the safety position
automatically.
͉
͉
It is impossible to prevent the motorised products from reacting or to change their position while the
wind is blowing stronger than the threshold set and/or the Ondeis rain sensor detects rain.
3.2.2. The wind stops blowing but it is still raining
As long as the Ondeis sensor detects rain, the motorised product remains in the safety position:
3.2.3. The wind continues to blow but it is no longer raining
As long as the Eolis io sensor detects that the wind exceeds the threshold set, the motorised product
remains in the safety position:
3.2.4. The wind stops blowing and it is no longer raining
When the Eolis io sensor no longer detects any wind for 30 s and the Ondeis rain sensor no longer
detects any rain:
• The wind LED goes off.
• It is then possible to control the motorised products in manual mode.
• All the automatic functions will remain locked for another 11 min 30 s.
22
Copyright
©
2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Eolis io

Publicité

Table des Matières
loading

Table des Matières