Tools Required; The Eolis Io In Detail; Installation; Installation Recommendations - SOMFY Eolis io Notice

Eolis io

1.5. TOOLS REQUIRED

• Drill and drill bit
• Phillips screwdriver
• Flat-blade screwdriver
• Pencil
• Depending on the sensor version, certain accessories required for installation are not supplied
in the kit:
- Cable which complies with the standards in force in the country in which it is being installed
(depending on version).
1.6. THE EOLIS IO IN DETAIL
Description
E Anemometer
F Protective housing
G Mounting bracket
H PROG button
I Wind LED
J Wind potentiometer

2. INSTALLATION

2.1. INSTALLATION RECOMMENDATIONS

• Choose a location with maximum wind detection and which is not hindered by obstacles: install
the sensor in a location that is not sheltered from the wind.
• Install the sensor near the product which it controls.
• Never install the sensor underneath the motorised product.
• Always fi t the sensor with the anemometer (E) on top!
͉
͉
The articulated structure of the Eolis io sensor enables it to be
mounted on walls or roofs with a slope of up to 15°.

2.2. WIRING

2.2.1. Eolis io wiring
Attention
Perform disassembly and wiring operations away from any dust, moisture or foreign bodies to
maintain tightness.
1) Switch off the mains power supply.
2) Remove the protective housing (F).
Copyright © 2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
E
F
G
OFF
1)
2)
90°
STOP
F
EN
H
I
J
15