Overview And Selection Of Menu Functions - ModelCraft MC30 Notice D'emploi

e) Overview and Selection of Menu Functions
From within the main menu (see fig. 5) press the "ENTER" button, then use
the "+" or "-" buttons to select the desired function.
With the "ENTER" button you can move on to setting the function, with the
"EXIT" button you can return to the main menu (see fig. 5).
The exact description of the individual functions is available in the following
pages.
"1:EPA" = Setting of the maximum servo travel
"2:D/R" = Dual-Rate
"3:S_TRIM" = Servo middle setting
"4:REV" = Servo reverse
"5:ST CURV" = Exponential setting for the steering servo
"6:TH CURV" = Setting of throttle/braking curve
"7:ABS" = ABS braking
"8:MODEL" = Model memory
"9:SPEED" = Servo extend and return speed
"10:ATS" = Automatic start
"11:MODULATE" = Register transmitter to receiver
"12:BR_MIX" = Brake mixer
"13:MIX" = Channel Mixer
"14:TH HOLD" = Throttle hold
"15:F/S" = Fail-safe
"16:NEUTRAL" = Calibrate neutral setting
"17:SOUND" = Switch off sound signals
"18:RESET" = Reset transmitter to factory settings
"19:M_RES" = Delete model memory data
"20:TIMER" = Set/activate UP/DOWN timer
62
Function11.2V
1:EPA
2:D/R
3:S_TRIM
4:REV
Function11.2V
5:ST CURV
6:TH CURV
7:ABS
8:MODEL
Function11.2V
9:SPEED
10:ATS
11:MODULATE
12:BR_MIX
Function11.2V
13:MIX
14:TH HOLD
15:F/S
16:NEUTRAL
Function11.2V
17:SOUND
18:RESET
19:M_RES
20:TIMER
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11