Programming The Functions - Conrad Electronic 75 15 16 Notice D'emploi

B. Press the keys "6" —- "1" —- "#"
Output 2: is locked

(9) Programming the functions

A. User code (input mode)
I) Press the buttons "7" —- "0" —- "0" —- "#"
Manual input mode —- Press the "number" key "#" —- Entered
user code is confirmed = code input must always be completed by pressing the
"#" key!
II) Press the buttons "7" —- "0" —- "1" —- "#"
Automatic input mode —- The user code must be just as long as the program-
ming code!
In this case, you do not have to press the "number" key "#" to confirm the entered
user code.
B. Output relay – Signal sounds when the relay is triggered
I) Press the buttons "7" —- "1" —- "0" —- "#"
ed.
II) Press the buttons "7" —- "1" —- "1" —- "#"
C. Key sound
Press the buttons "7" —- "2" —- "0" —- "#"
This suppresses the key sound and deactivates it during operation.
Press the buttons "7" —- "2" —- "1" —- "#"
This activates the key sound, which is then audible during operation.
40
Factory setting = short-time mode: 3 seconds!
Factory setting = manual code input
Factory setting = announcement is deactivated!
Factory setting = key sound is activated!
The signal tone is deactivat-
The buzzer sounds for 1
second. The output relay is
activated.