Switching Between Multiple Audio Sources With The Naída Ci M90; Placing The Naída Ci M90 In Flight Mode - Advanced Bionics Naída CI M90 Mode D'emploi

Please refer to the accessory user guide for initial setup
and pairing instructions.
Switching between Multiple Audio Sources with
the Naída CI M90
A phone call from a Bluetooth-enabled device has
highest priority and will pause other audio streaming from
a connected device. In order to switch audio streaming
source, simply pause the audio from the current source
and start streaming from another source.
Placing the Naída CI M90 in Flight Mode
The Naída CI M90 communicates wirelessly with other
devices in the 2.40 GHz to 2.48 GHz frequency range.
When flying, some operators require all devices to be
switched into flight mode. Entering flight mode will not
disable normal sound processor functionality but will
disable Bluetooth connectivity functions.
Activating and Deactivating Flight Mode
1. Hold down either the top or bottom of the multifunction
button while attaching the battery.
2. Continue to hold down the button while the sound
processor starts up, until a long, solid orange LED is
visible, approximately 10 seconds. Note that the start-up
LEDs that indicate the battery life of the rechargeable
battery and the program number will be seen before the
long, solid orange flight mode LED.
3. Removing and reattaching the battery will take
the sound processor out of flight mode.
33