Streaming Audio Via Bluetooth With The Naída Ci M90; Pairing The Naída Ci M90 To Phonak Accessories - Advanced Bionics Naída CI M90 Mode D'emploi

When making a phone call, you will hear a dialing tone
through the sound processor. The sound processor
microphones pick up your voice. When receiving a
call, a call notification will be heard through the sound
processor. You can accept the call with a short press
on the upper or lower part of the multifunction button on
the sound processor or directly on the phone.
You can reject or end a call with a long press on the upper
or lower part of the multifunction button on the sound
processor or directly through the phone.
Streaming Audio via Bluetooth with the Naída CI M90
After successful pairing of your processor(s) to your
Bluetooth-enabled device, ensure that your device
is not muted and volume is not set to minimum. Then,
simply start the audio on the Bluetooth-enabled device
and the sound processor will start streaming the audio.
Environmental balance and access to surrounding sounds
can be managed using the multifunction button, the AB
Remote mobile application, or the Phonak RemoteControl.
Pairing the Naída CI M90 to Phonak Accessories
Your Naída CI M90 can be paired to the following Phonak
accessories:
•
Phonak RemoteControl
•
Phonak TV Connector
•
Phonak PartnerMic
•
Phonak Roger transmitters
•
Phonak Naída Link M hearing instrument
32