Installation And Connection; Instructions For Installation - Hayward MICRO HP2021DT3C Manuel D'instructions Et D'installation

4. INSTALLATION AND CONNECTION

4.1 Instructions for installation

The heat pump must be placed outdoors and outside of any enclosed
technical space.
The heat pump must be installed at a minimum safety distance from the
pool, according to the installation standards that apply in your country
(see the table of installation standards below).
For FRANCE, the minimum installation distance is 3.5 m according to
standard NF-C-15 100.
F
NF C15-100
D DIN VDE 0100-702
A ÖVE 8001-4-702
UNE 20460-7-702 1993, RECBT ITC-
E
BT-31 2002
IRL Wiring Rules + IS HD 384-7-702
I
CEI 64-8/7
LUX 384-7.702 S2
NL
NEN 1010-7-702
P RSIUEE
• The heat pump must be installed on the ground, on a flat, horizontal surface
(for example, on a concrete slab) capable of bearing the load.
• To limit vibrations, install the heat pump on the provided bushings.
• Do not install the heat pump on a surface that may intensify the unit's
vibrations.
• Do not install the heat pump anywhere that may amplify its noise level or
anywhere where its noise could disturb neighbours.
GB
BS7671:1992
EW EVHS-HD 384-7-702
H MSZ 2364-702/1994/MSZ 10-553 1/1990
M MSA HD 384-7-702.S2
PL PN-IEC 60364-7-702:1999
CZ
CSN 33 2000 7-702
SK STN 33 2000-7-702
SLO SIST HD 384-7-702.S2
TR TS IEC 60364-7-702
7