General Instructions - Hayward MICRO HP2021DT3C Manuel D'instructions Et D'installation

1. GENERAL INSTRUCTIONS

We thank you for purchasing this pool heat pump from Hayward Micro.
Hayward heat pumps are designed in accordance with strict manufacturing
standards to meet the highest levels of quality required and to offer you
exceptional performance throughout your swimming season.
This document must be given to the pool owner and should be kept
in a safe place.
Read the instructions in this manual carefully before using the
device.
Keep this manual in a safe place so that it can be consulted in the
future.
The illustrations in this manual are presented to facilitate
comprehension. They are of no contractual value.
Heat pumps from Hayward Micro are intended exclusively for heating
the water in above-ground swimming pools.
Do not use this equipment for other purposes.
This manual includes all of the necessary information concerning installation,
troubleshooting, and maintenance.
The manufacturer of this product will not, under any circumstances, be held
responsible in the case of injury to the user or damage to the unit resulting
from improper installation or troubleshooting or from poor maintenance. It is
essential to follow all of the instructions specified in this manual at all times.
Failure to comply with these recommendations will invalidate the warranty.
Copyright 2020© - The information contained in this manual is the property
of Hayward. It cannot be reproduced, in part or in whole, without prior written
authorisation from the manufacturer.
1