Putting In Service; Overview Of The Control Panel - Hayward MICRO HP2021DT3C Manuel D'instructions Et D'installation

5. PUTTING IN SERVICE

5.1 Overview of the control panel

The heat pump is fitted with an electronic control panel, electronically
connected and pre-set at the factory to heating mode.
OFF Mode
When the heat pump is on standby (OFF mode), the indication OFF is
displayed on the screen.
ON Mode
When the heat pump is running or adjusting (ON mode), the water inlet
temperature is displayed on the screen.
OFF Mode
12
On/Off and Return button.
Scroll up / +°C.
Scroll down / -°C.
ON Mode