Ingersoll Rand Easy lub Manuel De Service page 24

Fault : Pump does not deliver the lubricant
Cause :
Cartridge empty
Lubricant supply blocked
No oil pressure supply
Air entrapments in the suction area of the cartridge
Fault : Lubricant quantity too low
Cause :
Throttle not adjusted correctly
Fault : Lubricant quantity too high
Cause :
Throttle not adjusted correctly
Fault : Lubricant leaking at the cartridge inlet
Cause :
Leakage
Fault : Lubricant leaking at the cartridge outlet
Cause :
Leakage
Fault : Oil pressure leaking at the hydraulic system
Cause :
Leakage
86621125 / 24
Troubleshooting
Remedy :
Replace the cartridge, see page 17
Check the cartridge
Check the hydraulic system and repair it
Check the tube and hose lines and replace them
Vent housing, see page 16
Remedy :
Turn the throttle anticlockwise by 1 to 2 notches
(more lubricant will flow out) see fig. 3
Remedy :
Turn the throttle clockwise by 1 to 2 notches
(less lubricant will flow out) see fig. 3
Remedy :
Check the seals on the pump unit and replace it if necassary
Check the right tightening of the cartridge
Remedy :
Check the fittings and retighten them if necessary
Remedy :
Check the fittings and retighten them if necessary
User's manual
Manuel de service