Even when using fall arrest systems, the lanyard must always be set as short as
possible in order to keep the free-fall height to a minimum in case of a fall. For safety
purposes, it is essential to select the position of the anchor device and the way work is
carried out so that the free-fall and fall height are limited to a minimum. Ideally, a
fall over the edge should be completely prevented by appropriate use of the
PFPE.
Position the anchor device to the building in such a way that fall factor 1 is only
possible at the most when falling over the edge of the roof.
Please note that if these user instructions are not observed, and if the documentation
is not complete, any recourse claims are excluded.
In case of uncertainty when installing or using the system, the manufacturer must be
contacted!
At the access to the safety system (e.g. roof hatch), a set of operating instructions
should be attached with information about the position and use of the anchor devices!
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection devices – www.lux-top-absturzsicherungen.de
Page 4 Version 11/2018