ST Quadrat LUX-top FALZ-PLUS II Manuel D'utilisation page 26

LUX-top
STANDARDS
®
LUX-top FALZ-PLUS II
Type A+ CEN/TS16415:2013
SYMBOLS AND MARKINGS
A label must be attached and contain the following information:
· Type designation:
· Number of the relevant standard:
· Name or logo of the manufacturer:
· Manufacturer's serial number / year made:
· Max. permitted number of persons:
· Symbol indicating that the user instructions must be observed:
The legibility of this product labelling must be checked after installation and during the
recommended annual inspection!
If the labelling is no longer accessible after installation, it is recommended to attach an
additional label close to the anchor device!
Manufacturer: ST Quadrat S.A.
11, rue Flaxweiler
L-6776 Grevenmacher/Potaschberg
Luxembourg
Notified body used at the time of the type test:
DEKRA EXAM GmbH certification centre - Dinnendahlstrasse 9, D – 44809 Bochum
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection devices – www.lux-top-absturzsicherungen.de
®
FALZ-PLUS II
has been tested and certified according to DIN EN 795:2012
Page 10 Version 11/2018
LUX-top
DIN EN 795:2012 Type A + CEN/TS16415:2013
®
FALZ-PLUS II
XX/20XX