ST Quadrat LUX-top SDA-Z II Manuel D'utilisation page 20

Masquer les pouces Voir aussi pour LUX-top SDA-Z II:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation recommendation / installation spacings
LUX-top® SDA
on
high-pitched roofs
The installation spacings must be chosen according to the national regulations and
depending on the roof geometry.
The correct choice and layout of anchor devices provided permanently on the roof must be
made depending on the type and use of the anchor device and taking into account the
special features of the roof.
For information on the recommended implementation and positioning of anchor points on
the roof, please refer to the BGI 5164/DGUVI 201-056 "Planungsgrundlagen von
Anschlageinrichtungen auf Dächern" (planning principles for anchor devices on roof),
which is determined by the international experts workgroup D-A-CH-S.
The brochure is available, among other things, at
www.lux-top-absturzsicherungen.de
for
you to download free of charge.
®
In some cases it can make sense to combine horizontal anchor devices (e.g.
LUX-top
®
FSE 2003
system with
LUX-top
ASP
- anchor points along the ridge). In case of doubt
contact the manufacturer!
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection solutions – www.lux-top-absturzsicherungen.de
7
Version 01/2017

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lux-top sda-sLux-top sda-bLux-top sda-fz

Table des Matières