Setup Menu - DeFelsko PosiTector BHI Guide Rapide

Reset
Reset (menu reset) restores factory settings and returns the
Gage to a known condition. The following occurs:
- All batches, stored measurements, batch names and screen
captures are erased.
- Calibration adjustments are returned to factory settings.
- Menu settings are returned to the following:
Memory = OFF
Auto Sub-Batch = OFF
Statistics = OFF
Hi Lo Alarm = OFF
Perform a more thorough Hard Reset as follows:
1. Power down the Gage and wait 5 seconds.
2. Simultaneously press and hold the (+) and
until the Reset symbol
This returns the Gage to a known, "out-of-the-box" condition.
It performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following status:
Bluetooth Smart = OFF
Test Time = 1 second
Sound = ON
Backlight = Normal
Flip Display = Normal
NOTE:
Date, Time and WiFi settings are not affected by either Reset.

Setup Menu

Setup Menu
Bluetooth & Stream = OFF
WiFi & Access Point = OFF
Auto Dim = ON
Hi Res = OFF
appears.
Auto Sync .net = ON
USB Drive= ON
Language = English
Battery Type = Alkaline
6
center buttons