Setup Menu - DeFelsko PosiTector RTR Guide De Démarrage Rapide

During measurement, if the linearized measurement falls outside
of the selected tape grade's range, the Gage will suggest a more
suitable tape grade to perform the measurement.
Reset
Reset (soft reset) restores factory settings and returns the Gage to
a known condition. The following occurs:
- All batches, stored measurements, images, batch names and
screen captures are erased.
- Menu settings are returned to the following:
Memory = OFF
Statistics = OFF
Memory Display = None
Perform a more thorough Hard Reset by powering down the
Gage, waiting several seconds, then simultaneously holding both
the center
appears. This returns the Gage to a known, "out-of-the-box"
condition. It performs the same function as a menu Reset with the
addition of:
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following:
Units = microns
Flip Display = Normal
White on Black = OFF
Language = English
NOTE:
Date, Time and WiFi are not affected by either Reset.

Setup Menu

Setup Menu
Bluetooth = OFF
WiFi = OFF
and (+) buttons until the Reset symbol
Battery Type = Alkaline
Backlight = Normal
USB Drive= ON
Auto Sync = OFF
8
Tape Grade = XC
Linearize = ON