Starting Your Oven; Switching The Oven On And Off; Selecting The Cooking Mode; Changing The Cooking Mode - Fulgor Milano F7SM24S1 Instructions Pour L'installation Et L'utilisation

Fours electroniques
Masquer les pouces Voir aussi pour F7SM24S1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Switching the oven on and off

IMPORTANT
• The
key does not stop the function.
• After switching off the oven, the cooling fan could continue
to operate until the inner parts of the oven have cooled
down.
Press
to switch the oven on and press again to switch it off.
The oven returns to standby mode.

Selecting the cooking mode

IMPORTANT
• Do not leave the door open for a long time during cooking.
• The door must be kept closed during the BROIL functions.
• Position the grill or grills on an appropriate level.
TRUE CONVECTION
(FAN HEAT)
CONVECTION ROAST
(TURBO CONVENTIONAL HEAT)
CONVECTION GRILL
(TURBO GRILL & BASE HEAT)
CONVECTION BAKE
(TURBO BASE HEAT)
ECO BAKING
BROIL
(ECO GRILL)
DOUBLE GRILL
(FULL GRILL)
DOUBLE CONVECTION GRILL
(TURBO GRILL)
UPPER BAKING
PIZZA
CLEAN
DEFROST
DEHYDRATE
BAKE
(BASE HEAT)
ROAST
(CONVENTIONAL HEAT)

8 - Starting your Oven

1. Select the icon
and press the key
appropriate cooking mode according to the food to be
cooked using the arrows
2. On this display page, it is still possible to change the cooking
mode by using the
keys.
3. If the proposed temperature is correct, confirm with the
key to start cooking, otherwise, if the
within 10 seconds, the oven switches to automatic mode
and the cooking mode icon becomes animated.

Changing the cooking mode

1. During untimed cooking, a cooking pause can be set
by pressing the
key. All the settings of the suspended
cooking operation remain stored and can be reactivated by
pressing the same key again.
2. To change the cooking mode while the oven is working,
press the
key and then the
cooking mode can be selected from among those available
in the group by means of the arrows

Changing temperature

IMPORTANT
• In all the cooking modes where the temperature is fixed,
this is not shown on the screen.
• At the end of a function, the display screen shows the
residual compartment heat temperature from the standby
page.
1. From the cooking mode preview display page, the
temperature can be changed by means of the arrows
subsequently confirming by means of the
2. Once cooking has started, the temperature can in any case
be changed, at any time, by means of the arrows
Select the
and confirm with the key
.
key is not pressed
, key. At this point, another
.
key.
.
EN
13

Publicité

Chapitres

Table des Matières
loading

Table des Matières