General Power Tool Safety Warnings - Güde GVZ 1432 F 2in1 Traduction Du Mode D'emploi D'origine

Symbols
Warning / Caution!
Read the operating instructions to redu-
ce the risk of injury.
Wear eye protective goggles !
Wear ear protectors!
Wear gloves!
Wear safety cut through resistant shoes
with safety sole and steel toe !
Slow
Unplug the machine before any servicing
or repair!
Caution! Blades run down. Wait until all
rotating parts have stopped.
Switch off the engine before any work on it.
Always keep children and unauthorised
persons out of reach of the appliance.
Keep dry at all times.
Never expose tool to rain.
Never reach into the danger area of the
plane when it is running.
Warning against thrown-off items
Warning against sharp knives. Keep
hands and feet away.Knives keep running
for a short time after the appliance is
switched off.
Warning against cutting injuries
Keep bystanders in safe distance from
the appliance (at least 5m)
Unplug the mains plug if the cable beco-
mes damaged or tangled.
Whilst working, always maintain a
sufficient distance from the cable on the
ground and do not run over the cable.
Safety class II
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Keep dry at all times.
This side up
Guaranteed sound power level L
101

General Power Tool Safety Warnings

WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. Save all war-
nings and instructions for future reference.
The term „power tool" in the warnings refers to your
mains-operated (corded) power tool and battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while ope-
rating a power tool.Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet con-
ENGLISH
19
WA