General Power Tool Safety Warnings - Güde TRIKE 405/40-2.5 S Traduction Du Mode D'emploi D'origine

Caution, risk of drawing-in
Always keep children and unauthorised
persons out of reach of the appliance.
Protect against humidity
Never expose tool to rain.
Wear eye protective goggles !
Wear ear protectors!
Wear protective gloves !
Wear safety cut through resistant shoes
with safety sole and steel toe !
Warning against thrown-off items
Warning against sharp knives. Knives
keep running for a short time after the
appliance is switched off.
Keep bystanders in safe distance from the
appliance (at least 5 m)
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up
Certified by Intertek GS
Charging equipment
Warning/caution!
Read the Operating Instructions
Charger to be used in closed spaces only.
T2A
Appliance protection
Protection class II
Battery
Protect the battery against heat and fire.
Protect the battery against water and
moisture.
Protect the battery against temperatures
above 40°C.
MAX. 40°C
Do not throw the batteries in household
waste.
Li-Ion
Deliver the batteries to a collection centre of
old batteries where they will be recycled in
an environmentally friendly way.

General Power Tool Safety Warnings

WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. Save all war-
nings and instructions for future reference.
The term „power tool" in the warnings refers to your
mains-operated (cordepower tool or battery-opera-
ted (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while ope-
rating a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (groundepower
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and refri-
gerators. There is an increased risk of electric shock if
your body is earthed or grounded.
ENGLISH
27