Always inspect the machine before use to
ensure that the rollers and screws are not blunt,
worn or damaged. Replace worn or damaged
rollers and screws to ensure that the machine
remains balanced.
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conflict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Start the motor carefully in accordance with the
manufacturer's instructions and ensure that you keep
your feet a sufficient distance away from the tool(s).
Never place your hands or feet on or under turning
parts.
Do not incline the appliance when being started.
Do not start the appliance when you are standing in
front of the ejection opening.
Walk! Never run!
Provide a safe posture, especially on slopes. Do not
work on too steep slopes. Be particularly careful when
changing travelling direction on slopes.
Pay maximum attention when turning around and
pulling the appliance to you.
Always switch off the machine when you are carrying
it, tipping it or moving it when it is not on the lawn.
Wait until all the rotating parts have reached a
standstill.
If an undesirable item is encountered or the appliance
starts vibrating, the appliance must be switched off
and the power plug removed. Check whether the
appliance is not damaged. Repair any damage.
Switch the appliance immediately off after finishing
your work.
Stop the device and disconnect it from the power
supply Wait until all rotating parts have stopped and
the appliance has cooled down.
· whenever you leave the lawnmower
· before removing blockages
· before checking, cleaning or working on the
device
· after contact with a foreign object, to check the
device for damage
· To adjust the mowing height.
· To empty the collection bag.
Never lift or carry a machine whilst the motor is
running.
The ON/OFF switch and safety switch must not be
locked.
Please observe the legal provisions of regulations
on protection against noise. These provisions can be
different in various places.
Warning! This power tool generates an electromagne-
tic field during operation. Under certain circum-
stances, this field may affect active or passive medical
implants. To reduce the risk of serious or fatal injury,
we recommend that individuals with medical im-
plants consult their physician and the manufacturer
of the medical implant before operating the machine.
Do not use the device near flammable liquids or ga-
ses. Risk of fire and explosion in case of short circuit.
Maintenance
Danger – Rotating blades.
Wait until all rotating parts have stopped and the
appliance has cooled down.
Switch off the apparatus, disconnect it
from mains by unplugging and allow it to
cool down before setting up, retrofitting,
cleaning, performing maintenance, storing
or transporting the apparatus.
Always keep the device clean, as well as the venti-
lation slots in particular. Never spray water on the
device body Do not clean the plastics with solvents,
flammable or toxic fluids. For cleaning, use a damp
cloth only.
Apply environment-friendly oil to all moving parts.
Check the collection bag at regular intervals for any
wear and aging.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at www.
guede.com.
Disposal
The disposal instructions are based on the icons
placed on the appliance or its package.
Any damaged or disposed devices must
be delivered to appropriate collection
centres.
Transport packaging disposal
The packaging protects the machine against damage
during transport. Packaging materials are usually
chosen based on environment aspects and waste
treatment principles and are therefore recyclable. Re-
turning the packaging into material circulation saves
ENGLISH
21