Duty Cycle - Phoenix Mecano RK Rose+Krieger RKMultiControl duo Notice D'assemblage

6. Product information

6.2.1 Duty cycle

It is essential that you obey the permitted controller duty cycle of 20% (drive for max. 2 minutes
and then rest for 8 minutes), in order to avoid damage.
You must take note of drive duty cycle. This can sometimes be lower. You will find the stipulated
duty cycles on the maker's plate.
Please note that in the delivery state, the duty cycle limiter is set to 30 % on the controller!
In order to protect controllers and drives against damage, you can increase the duty cycle limiter
upon request. To do so, please contact RK Rose+Krieger GmbH.
If you do not obey the duty cycles, you can damage controllers and drives!
49