General Information; Features; Heating Specifications; Important - Napoleon HYBRID 150 Instructions D'installation Et D'utilisation

2.3

GENERAL INFORMATION

2.3.1 FEATURES

• Maximum log length of 24" (610mm) (HMF150),
and 30" (762mm) (HMF200)
• Long burn time - up to 12 hours (HMF150), 18
hours (HMF200)
• Automatic control with thermostat
• Large fi rebox capacity

2.3.2 HEATING SPECIFICATIONS

DO NOT LET THE APPLIANCE BECOME HOT ENOUGH FOR ANY PART TO GLOW RED.

IMPORTANT

Differences in chimney height and draft may lower overall burn times.
Approximate Heating Capacity up to 2,000 square feet (167.23m
(278.71m ) for HMF200 (Will vary with the home's fl oor plan, insulation and outside temperature).
2
Maximum burn time up to 12 hours (HMF150), 18 hours (HMF200).
Average BTU Output per hour 70,000 - 85,000 (HMF150), 95,000 - 110,000 (HMF200).
Oil furnace module up to 91,000 BTU input.
Electric furnace up to 20 Kw (HMF150), 25 Kw (HMF200).

2.3.3 ELECTRICAL SPECIFICATIONS

Fully confi gured furnace 13.3 amps, 120 V, when Riello oil burner is used in multi furnace confi guration.
Fully confi gured furnace 17.4 amps, 120 V, when Beckett oil burner is used in multifurnace confi guration.
(Optional electric furnace module's up to 85 amps.)

2.3.4 OPTIONAL MODULES

Optional Modules Available:
• Glass Door HMFK-GLASS, Solid Door HMFK-SOLID
• "Add On" Furnace Module HMFK-ADDON
• Blower Box Module HMFK-BMP50-1
• HMF/Gas Transition Module HMFK-GT
• Electric Furnace Module HMFK-EF15, -EF18, - EF20 (HMF150), HMFK-EF18, -EF20, -EF25 (HMF200)
• Oil Furnace Module HMFK-CMBCH-1 (HMF150), HMFK-CCH200 (HMF200), HMFK-OFRF40,
HMFK-OFBNX, HMFK-WMO
• Bi Energy Module (Quebec) HMFK-BIEK

2.3.5 APPLICABLE STANDARDS

Certifi cation Standards and Installation Codes:
UL391
UL727
CSA B366.1-M91
CSA B140.4-04
CSA B212-00

2.3.6 CALIFORNIA PROP65

Use of this product may produce smoke which contains chemicals known to the State of California to cause
2.4

RATING PLATE INFORMATION

Rating plate is located on furnace side panel without the return air opening.
• Outside air for combustion
• Choice of glass door for radiant heat through front
• Firebrick lining for fi rebox creates kiln like tempera-
CSA B415.1-10
CSA B365-10
CSA B139-09
NFPA 211
CSA 22.1
cancer, birth defects, or other reproductive harm.
of furnace, or solid door to provide more heating
through exchange surfaces
tures for maximum effi ciency and low emissions
H3.31
) for HMF150 and 3,000 square feet
2
CAN/CSA-C22.2 NO.0-M91
CAN/CSA-C22.2 NO.3-M1986
ANSI/NF NO.70
7
EN
W415-1504 / B / 11.30.16