Parker PSD1-M Notice page 13

3.3.4. Conditions of utilization for CSA certification
External Overvoltage Protection
Protection externe contre les surtensions selon la norme canadienne
22.2-No.14-13, avec dispositif de protection contre les surtensions RC, certifié
(V/CA2) CSA.
Veuillez respecter le tableau dans le fichier d'aide.
Ground rail not sufficient
For CSA approval, earth rail must be replaced by a direct earth connection.
Risk of Electric Shock, wait at least 10 minutes before removing cover.
Removing the earth rail (4) (Right):
1 24 VDC
2 GND 24 VDC
3 DC power supply bus -
4 Protective earth
5 DC power supply bus +
Connecting protective earth
Connect protective earth via a copper wire of minimum
10 mm by means of the provided screws at the bottom
2
of the PSD1M (axis controller) and of the mains module
PSD1-M_P:
193-011003N5 DOC-0001-01-R015 2019-04
PSD1-M Notice simplifiée
10.04.19 15:43
13 (26)