Cup Tray; Decaffeinated Door; Bodywork - Faema X20 Guide Rapide

NOTE: the procedures described below must be carried out when the machine is switched off.

CUP TRAY (11)

1
At the end of the working day, pour a jug
of hot water into the basin (11) to remove
any encrustation in the drain; remove it
and wash it with running water.

DECAFFEINATED DOOR (5)

Use a damp sponge to remove any residue on the inside of the door and
in the decaf coffee conduit.

BODYWORK

Warning: the shiny parts of the bodywork must be cleaned using a soft cloth
and cleaning products WITHOUT ammonia or abrasives, removing any organic
residue present in the work area. In the case of tough dirt, use a damp sponge
and dry with a soft cloth.
Note: DO NOT spray liquid in the slots of the body panels and DO NOT use paper
or rough cloth for cleaning.
2
To remove it, grip and pull the basin (11)
lifting it slightly.
Do not use abrasive products; do not put
in the dishwasher.
11
5
29 EN
11