Day-To-Day Operation; Cup-Warmer (When Provided); Heating Phase - Faema Enova S Utilisation Et Installation

USE

10. Day-to-day operation

"Before setting the machine at work, make sure that:
• the main electric power switch is on;
• the mains water cock has been turned on".
Turn the master switch (1) to position 1. The indicator light
"machine on" (5) switches on.
If the water level in the boiler is less than the minimum
Turn the master switch (1) to position 2.
"Heating" now begins.
At the end of the day, turn the machine OFF by turning
the main ON/OFF switch (1) to position 0.

11. Cup-Warmer (when provided)

Place only coffee cups, cups and glasses to be used in
conjunction with the coffee machine on the cup-warming
plate.
Ensure that the coffee cups are completely drained before
placing them on the cup-warming plate.
No other objects shall be placed on the cup-warming plate
(11).
Press the button (12) and check to see that the light turns on.

12. Heating phase

During heating, if one of the coffee dispensing button (2)
is pressed, the machine dispenses a coffee at the tempe-
rature reached at the time.
Heating is completed when the boiler gauge indicator (14)
remains stable in the green area.
The machine is now ready to dispense coffee, steam and
hot water.
(10) are at similar temperatures, press the coffee dispen-
sing switches (2) and let the machine dispense coffee for a
few seconds. Then press the switch (2) to stop dispensing.
2
14
9 EN
1
5
11
12
2 2
10