Faema X20 Guide Rapide page 34

19
Move the soluble spout as shown above.
22
Put a sponge in the solution and then clean the mixer fixed part.
24
CLEANING SOLUBLES HOPPER
Remove any soluble powder
remaining in the hopper. Wash
with a damp cloth and the products
and methods normally used for
articles in contact with food; rinse
thoroughly and dry, removing any
organic residue.
Before replacing the hopper on
the machine, make sure that wet
or moist parts are completely dry.
20
Remove elbow from silicone pipe, then clean pipe with the brush.
25
Rinse all parts (fixed part too) with cold water accurately.
23
Put all the removed mixed parts (except the soluble hopper) in the
solution, then clean them accurately with a sponge.
26 EN
21
Put gloves on your hands.
26
Dry the parts.