Audio Settings; Saving Fm Stations To A Memory Slot; Retrieving Fm Stations From A Memory Slot - TechniSat DIGITRADIO 370 CD BT Mode D'emploi

With the All Stations setting, the scan stops automatically upon detecting
each available station. This can result in weak stations being played with
background noise.
> Press the ENTER button to save.

7.6 Audio settings

> Press the MENU button and select the [Audio settings] > [Audio setting]
item.
> Use / to select the [Stereo available] or [Mono only] item to play back in
stereo or only in mono sound when the FM reception is weak.
> Confirm the setting by pressing the ENTER button.
Alternatively you can also press the Mono/Stereo button (8) on the remote
control to switch directly.

7.7 Saving FM stations to a memory slot

The station memory can save up to 20 stations in the FM range.
> First set the desired station frequency (Section 7.3, 7.4)
> In order to store this station in a memory slot, hold down the PRESET button
while playing until [Save channel] appears on the display. Then use the /
buttons to select a favourites memory slot (1 - 20). Press the ENTER button to
save.
> Repeat this process to save additional stations.
You can also save stations to one of the One-Touch buttons (1 - 10) by
holding down the corresponding button a little longer (0 button = 10).

7.8 Retrieving FM stations from a memory slot

> To retrieve a station that you have stored in the FAV memory slots, briefly
press the PRESET button and select a station slot (1 - 20) using the /
buttons. Press the ENTER button to play the station.
If no station is saved in the selected station slot, [(empty)] appears on the
display.
Alternatively, the corresponding One-touch button (1 - 10) on the remote
control can be used.
62