Appendix; Ec Compliance Statement - Kemper Clean Air Tower Mode D'emploi

9 Appendix

9.1 EC compliance statement

in accordance with Appendix II 1 A to EC Machines Directive
2006/42/EG
Description/Type:
The following harmonised
standards are applied: EN ISO 12100
Documentation Representative: Mr Simon Kemper
Vreden, 02.02.2017
Date, Place
Part no.: 150 2627 (CAT 2.0)
All rights over changes without prior notice and errors reserved.
KEMPER CleanAirTower 2.0 Operating instructions - EN
Construction: stationary suction and filtering unit
CleanAirTower
System no.: 39 0600
is developed, designed and manufactured in accordance with
EC directives
2006/42/EC
2004/108/EC Electromagnetic Compatibility
97/23/EC Pressure Equipment Type. 3, Para. 3
The safety objectives of the Low Voltage Directive
-
2006/95/EG were observed as per annex I, No. 1.5.1 of the
Machine Directive
at the sole responsibility of
Company: KEMPER GmbH
Von-Siemens-Str.
48691 Vreden
Appendices
EN ISO 13857
between upper and lower limbs
EN 349
EN ISO 4414
EN 61000-6-2
EN 61000-6-4
EN 60204-1
EN 13849
A complete list of the applied standards, guidelines and
specifications is held by the manufacturer. Operating manual
belonging to the system/machine is available.
Machines
Safety of machinery, equipment and
Safety of machinery Safety
Safety of machinery, minimum clearances
crushing of body parts
Pneumatic systems safety
Interference immunity EMC
Interference emission EMC
Safety E-technology
Safety of controls
Signature
- 76 -
distances
Technical Director R & D
Identification of the signatory
Rev.: 00
Issue: 02/2017