Information For The End-User - Kemper Clean Air Tower Mode D'emploi

1.3 Information for the End-user

The operating instructions are a key component of the filter unit.
The operator must ensure that the operating personnel is aware of the contents of
this manual.
Based on national regulations for accident prevention and environmental protection,
the operating instructions are to be supplemented by the end-user's own operating
instructions, including information on regulatory and reporting requirements to meet
specific operating requirements, such as work organization, workflow and staff
employed. Apart from the instruction manual and the legally binding accident
prevention provisions applicable in the country and place of use, the recognized
technical regulations for safe and proper work must also be observed.
Without approval, the operator may not make KEMPER GmbH any changes,
attachments and conversions to the filter unit which may prejudice safety! This
applies particularly to the installation and adjustment of safety devices and safety
valves as well as for the welding on load-bearing components. Any spare parts used
must correspond to the technical requirements set by KEMPER GmbH. This is
always guaranteed by using original spare parts!
Use only trained or instructed staff for operating, servicing, repairing and transporting
the filter unit. Make clear to the staff who is responsible for the operation,
maintenance, repair and transport.
Part no.: 150 2627 (CAT 2.0)
All rights over changes without prior notice and errors reserved.
KEMPER CleanAirTower 2.0 Operating instructions - EN
- 44 - Rev.: 00
Issue: 02/2017