Waste Disposal; Plastics; Metal - Kemper Clean Air Tower Mode D'emploi

8 Waste Disposal

WARNING
Skin contact with dust, cutting fumes etc. can lead to skin
irritation in sensitive individuals!
Only trained and authorized technicians may carry out
disassembly work on the filter unit, while observing the safety
instructions and the applicable accident prevention regulations!
Severe damage to health of respiratory organs and the respiratory
tract!
To avoid dust contact and inhalation, use protective clothing,
gloves and a ventilated breathing system, e.g. KEMPER autoflow
XP or a class FFP2 respirator filter mask to EN 149.
You must avoid releasing dangerous dust during disassembly
tasks, so that nobody entrusted with the task is injured.
CAUTION
In all work on and with the filter unit, observe the statutory
obligations for avoiding waste and proper recycling/rectification!

8.1 Plastics

Plastics used must be sorted as far as possible.
Plastics must be disposed of in compliance with the legal requirements.

8.2 Metal

Separate and dispose of the various metals. Disposal must be carried out by an
authorized company.
Part no.: 150 2627 (CAT 2.0)
All rights over changes without prior notice and errors reserved.
KEMPER CleanAirTower 2.0 Operating instructions - EN
- 74 - Rev.: 00
Issue: 02/2017