Backlight Mode - Promax PROLITE-63 Manuel D'utilisation

To edit the status or change a parameter value:
1.- Press
2.- Place the arrow pointing at the parameter to modify and press SEL
3.- The arrow moves next to the parameter value. Now you can change it using
or
next field.
4.- Once edited, press again SEL
5.- Press CONFIG
main menu.
Parameters you can edit are:
a) LANGUAGE
It is the language used on screen and menus. Press
among the available languages (Spanish, English and German).
b) TIME
It indicates current time. Press
c) DATE
It indicates current data in European format (dd-mm-yy). Press
to enter day, month and year.
d) BEEP
This parameter enables (YES) or disables (NO) the beep. When it is enabled a
beep sounds when pressing any button.
e) BACKLIGHT MODE
This parameter allows you to enable (YES) or disable (NO) the backlight. When
AUTO option is active, the backlight turns off automatically after 1 minute
without pressing any key.
f) LCD CONSTRAST
This parameter allows you to change the screen contrast.
Page 12
or [5] to move along the menu.
. When editing date and time, press SEL
[2] to get out from the SETUP menu and back to the
USER'S MANUAL. PROLITE-63
[4] to get out of the parameter edition.
or [5] to enter hour and minutes.
[4].
[4] to move to the
or [5] to move
or [5]
06-2011