Setup Mode - Promax PROLITE-63 Manuel D'utilisation

USER'S MANUAL PROLITE-63
- OPTICAL LOSS TEST SET
It measures the attenuation for GPON networks by identificating modulation of
270 Hz for 1310 nm, 1 kHz for 1490 nm and 2 kHz for 1550 nm. It should be
used in combination with a PROLITE-105.
- THRESHOLD CONFIGURATION
It allows you to configure up to 10 different pairs of threshold values.
- SETUP:
This option allows you to configure some parameters such as language, time, data,
contrast, etc.
To access any of these menus, press the button CONFIG
main menu and then press UP or DOWN
Now press CONFIG

4.2.1 SETUP Mode

This menu allows you to edit some basic parameters such as time, hour and
language among others.
To access the SETUP menu:
1.- Press the button CONFIG
2.- Press
3.- Press CONFIG
It shows a screen with some parameters to configurate the system (Fig. 5).
06-2011
[2] or SEL [4].
[2].
or [5] until pointing at SETUP.
[2] or SEL
Figure 3.- SETUP Screen.
or [5] until your option is selected.
[4] to get into the SETUP menu.
[2] to access the
Page 11