Auto Power Off; Optical Power Meter Function (Opm) - Promax PROLITE-63 Manuel D'utilisation

USER'S MANUAL PROLITE-63
g) AUTO-POWER OFF
This parameter lets you define a time for the instrument automatic shutdown.
After this time without pressing any key, the instrument automatically turns off.
This time can range from 1 to 60 minutes. To disable this option select OFF.

4.2.2 OPTICAL POWER METER Function (OPM)

This function allows you to measure optical power across the infrared wavelength
band (1100 nm - 1700 nm).
Under the situation of laboratory, LANs, WANs and CATV as well as
longdistance optical network, the Optical Power Meters, together with PROMAX
stabilized laser sources, can be used to identify optic fibre, measure optical attenuation,
verify continuity and evaluate fibre link transmission quality.
To access this function:
1.- Press CONFIG
2.- Press
3.- Press SEL
below).
Next are described each one of the fields on screen:
[1] Wavelenght at which it is measuring. Available wavelenght are 1310, 1490,
1550 and 1625 nm.
06-2011
[2].
or [5] until pointing at OPTICAL POWER METER.
[4] or CONFIG
Figure 4.- OPTICAL POWER METER.
[2] to get into this function (see figure
Page 13