Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Intended use

Model name
SQlab 521 Short (­5 mm)
SQlab 521 Standard
SQlab 521 Long (+8 mm)
SQlab 521 Xlong (+15 mm)
SQlab 502 Short (­5 mm)
SQlab 502 Standard
SQlab 502 Long (+8 mm)
SQlab 502 Xlong (+15 mm)
SQlab 511 Short (­5 mm)
SQlab 511 Standard
SQlab 511 Long (+8 mm)
SQlab 511 Xlong (+15 mm)
The SQlab pedals are exclusively designed for use on bicycles under the conditions of
their Category according to ASTM F2043­13 or lower.
Categorie 1 according to ASTM F2043­13
Bicycles/attachments of this category are only used on tarred or paved roads and paths, with the wheels in per­
manent contact with the ground.
Categorie 2 according to ASTM F2043­13
In addition to the conditions of use listed in category 1, bicycles/attachments of this category may also be moved
on gravel and dirt roads with moderate gradients. In this category in rougher terrain there may be a temporary
loss of ground contact of the tyres. Jumps (drops) from a height up to max. 15 cm can occur.
Categorie 3 according to ASTM F2043­13
Bicycles/attachments in this category may, in addition to the conditions of use listed in categories 1 and 2 also
be used on rough trails, rough terrain and on difficult routes that require good riding technique. Jumps and drops
can occur here up to a maximum height of 61 cm.
On www.sq­lab.com/service/downloads/ you will find a list of all applications according to ASTM F2043.
Category according to ASTM F2043-13
Categorie 1
Categorie 1
Categorie 1
Categorie 1
Categorie 2
Categorie 2
Categorie 2
Categorie 2
Categorie 3
Categorie 3
Categorie 3
Categorie 3
eBike Ready Label
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal
Yes, if not wider than the original pedal

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

511502

Table des Matières