Intended Use - SQlab 702 Mode D'emploi

Intended use

The different models of the SQlab comfort and performance grips have been developed according to their characteristics for the various
functional ranges of touring, everyday, city, trekking and MTB cycling and have been correspondingly tested in numerous laboratory trials
and many kilometres of cycling. Using an improper grip may result in cycling errors, falls and accidents.
When describing the intended use, we follow the international categorisation ASTM F2043-13, which precisely describes the different
functional ranges.
Model designation
SQlab 702
SQlab 710
SQlab 710 short
SQlab STUBY
SQlab STUBY short
SQlab 7OX
SQlab 711R
SQlab 711 / SQlab 711 ltd. RUH
SQlab 711 2.0
SQlab grips are to be used exclusively on bicycles under the conditions of their corresponding category according to ASTM F2043-13 or
a lower category.
Category 1 according to ASTM F2043-13
Bicycles/add-on components in this category must only be used on tarred or paved roads and paths on which the
wheels have permanent ground contact.
Category 2 according to ASTM F2043-13
Bicycles/add-on components in this category may, in addition to the conditions of use referred to in category 1,
also be used on gravel and unpaved roads of a moderate grade. In this category, there may be a short-term loss
of tyre ground contact in harsher terrain. Jumps (drops) from a height up to max. 15 cm can take place.
Use category according to ASTM F2043-13
Category 1
Category 2
Category 2
Category 2
Category 2
Category 5
Category 4
Category 4
Category 5
eBike Ready Label
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes