SQlab 521 Mode D'emploi page 25

Assembly of the cleats
The cleats are screwed into the corresponding thread in the designated area of your cycling shoes Fig. (f). Tighten the screws of the
cleats with 4 to 6 Nm, unless otherwise specified by the shoe manufacturer. For an ergonomically correct alignment of the cleats, please
contact one of our trained SQlab dealers. A correct alignment of the cleats holds enormous potential. A central, straight alignment is
rarely the best choice.
More information are provided via our website www.sq­lab.com/en/sqlab­contact­points/the­foot/pain­numbness/.
Warning
A loose cleat can prevent the shoe from clicking out of the pedal. In such a case the loose cleat can lead to loss of control. Expect una­
voidable falls, injuries and paralysis or even death.
(f) (g)