System Setting Screen - Gima MONITEUR SPOT-CHECK PC-300 Manuel De L'utilisateur

3.2 System Setting Screen

On the measurement display screen, longtime press menu
key to enter the setup display screen, as shown in figure 3.2.
The user can make settings for wireless function, pulse beep,
blood pressure unit, temperature unit, date, time and so on.
Operation Instruction:
1. Longtime press
hearing one beep, and enter into setup screen.
When the patient ID blinks, it means the setup function
is available.
2. Short time press
the wireless transmission function.
3. Short time press
And the beeping mark
4. Short time press
5. Short time press
is blinking.
ENGLISH
, please release the key after
key to enable or disable
key to confirm the setting.
is blinking.
key to enable or disable the pulse beep.
key to confirm the setting. And the "kPa" (blood pressure unit)
Figure 3.2 setup display screen
88