Surface Mount Installation - Honeywell 301C Manuel De L'utilisateur

Surface Mount Installation

It is recommended that controllers be installed 5 feet (1.5 m) above the
floor, at approximate eye level.
Mark the holes as shown:
• Height markers 6 13/32" (16.3 cm) apart
• Width markers 10 9/16" (26.8 cm) apart
• Pre-drill 1/4" mounting holes as needed
• Securely mount the 301C using the appropriate screws
Wiring for the unit must be passed through the knock-outs provided at
the bottom of the unit.
11