Test Sequence - Honeywell 301C Manuel De L'utilisateur

Test Sequence

When test sequence is selected from the main Tests menu, the
controller will display the Test sequence screen.
If Esc is pressed on the keypad, the main Tests menu screen will be
displayed. However, to perform system tests, press any key to
proceed to the first test screen.
•
This screen tests each component individually and will advance
only to the next component when a key is pressed. This
option will display 13 screens. Screens 1, 2, and 3 test
Relays, BUZZER and LEDs.
The following six screens prompt the user to press the keypad buttons,
in turn: left, right, up, down, Silence, Enter and Esc. The system will
not advance until a key is pressed.
The system then moves to the Display test. When the blank screen is
displayed, it is testing for display pixels. Press any key to proceed to
the next step.
64