Network Menu - Honeywell 301C Manuel De L'utilisateur

7. Network Menu

The Modbus network menu allows network device information to be
either scanned or reset.
This menu offers four options, divided into two screens; the first screen
contains three options:
Reset Database:
Network Scan:
Reset and Scan:
Note: Once one of these options has been set, wait until the controller
completes the process. Do not interrupt or stop the process once
it has begun.
Resets all network device Tx information in the
database. This only resets the Tx infomation
for the network device. It does not affect
programmed Groups or Events.
Begins an auto-detect of all network devices
that allows the system to configure the Tx
database for network devices (i.e. it will scan
and add new devices but will not overwrite or
erase the old database). This process takes
approximately one minute.
Performs both previous functions
simultaneously.
57