Status - Honeywell 301C Manuel De L'utilisateur

Status

This screen displays the current event status and allows it to be either
enabled or disabled, depending on the current status.
Enable event: Toggles between Enable and Disable.
After going through all the steps and programming an event, this
screen will display "Enable event". Press Enter to activate all the
parameters and enable the Event.
If an existing Event is being consulted, this screen would display
"Disable event". Press Enter to disable an Event (it will not be deleted
but will not function). The programming of this Event is always
present, which means that it easily can be reactivated by scrolling to
this screen and pressing Enter.
45