User Areas - Topcom orbit Manuel D'utilisateur

SMS
Message alert tone
When you receive a text message, the message alert tone will sound. These beeps can
be switched on or off:
Set Message size
A standard text message is 160 characters long. You can set a message to be up to 612
characters and the message will be sent as 4 messages of 160 characters long:

11.9 User Areas

If you have more than one SMS terminal device on the same telephone line you must
create different User Areas. Each user can have his own Inbox and outbox which are only
accessible by a pin code. By giving each user different sub addresses, they can receive
there own private messages.
In order to receive personal SMS messages, you must give your correspondents the sub
address Number that they need to add to your standard telephone number (See below).
You correspondents will need to add your sub address to your telephone
number when they want to send personal SMS.
E.g. If your personal sub address is "1" and your telephone number is
123456789, your correspondents should send their SMS messages
to:1234567891! This is the number you need to remember and give to your
correspondents.
If no sub address is add to you telephone number or '0', all devices will receive these
messages.
You can change the sub address number to another one but only from 0-9:
Add a User mailbox
38
1 Enter the menu.
2 Select "Text Messaging".
3 Select "Text Settings".
4 Select "Message Alert".
5 Select "Yes" or "No".
1 Enter the menu.
2 Select "Text Messaging".
3 Select "Text Settings".
4 Select "Message Size".
5 Select "160 Characters" or "612 Characters".
1 Enter the menu.
2 Select "Text Messaging".
3 Select "Text Settings".
4 Select "Users".
5 Select one of the users and press "Options".
6 Select "Edit".
7 Enter the user name (max. 8 characters) and press "Save".