Memory Status; Change The Ringtone; Caller Identification; Call Waiting - Topcom orbit Manuel D'utilisateur

4.9

Memory status

4.10 Change the ringtone

5

Caller Identification

This service only works when you have a Caller ID/Clip subscription. Please
contact your telephone company.
When you receive a call from your fixed telephone line, the telephone number of the caller
appears on the handset display. You can also see his or her name if it is transmitted by
the network. If the name is programmed in the phonebook, the name in the phonebook
is displayed!
5.1

Call Waiting

This service only works when you have Caller ID / Call Waiting subscription.
During a call, you hear a beep (knocking tone) when a second call comes in (through the
earpiece). The number (or name) will be shown on the display. If no number/name is
available the phone will show "Call Waiting".
The available handsets (all the handsets that are registered on the
base) are shown.
4 Select the desired handset and confirm.
"Please wait..." appears on the display.
"Copy phonebook?" appears on the display of the destination handset.
5 On the destination handset, press the left menu key to confirm or
the right menu key to cancel the transfer.
6 Return to standby.
1 Press the right soft menu key "Names".
2 Select "Copy Phonebook".
3 Select "Memory Status".
The amount of entries in the phonebook are shown + amount of free
entries.
4 Return to standby.
1 Press the Down/Phonebook key.
2 Select the desired name or use the keypad to enter the first letter of
the name.
3 Select "Options".
4 Select "Ringtone".
5 Select the desired ring melody and press "Select".
6 Return to standby.
Caller Identification
25