Template Messages; Delete Messages; Sms Settings - Topcom orbit Manuel D'utilisateur

To delete this message:
9 Select "Delete" and confirm with "Yes". To cancel press "No".

11.6 Template messages

You can edit you own template messages to use when writing a message. The phone
can store up to 3 templates of maximum 32 characters. Default the templates are empty:
To Edit your own messages:
1 Enter the menu.
2 Select "Text Messaging".
3 Select "Templates".
4 Select the template message and select "Options".
To edit the message:
5 Select "Edit" to edit and select "Save" to store.
To delete the message:
6 Select "Delete" and confirm.

11.7 Delete messages

1 Enter the menu.
2 Select "Text Messaging".
3 Select "Delete Messages".
4 Select "Inbox, Draft, Outbox, or All Messages".
5 Confirm with "Yes" or press "No" to cancel.

11.8 SMS Settings

SMS Service center numbers
To send and receive SMS text messages you need the telephone number of your
Network's SMS Centre. These numbers have been pre-loaded into the phone. If you
accidentally delete the SEND or RECEIVE SMS Service Centre numbers you will need
to re-enter them in order for your SMS Service to work.
The Orbit can store 2 SMS Service center numbers, one incoming and one outgoing. This
sending SMS service number will be dialed out by the phone whenever you send out a SMS.
To set the SMS Center numbers
1 Enter the menu.
2 Select "Text Messaging".
3 Select "Text Settings".
4 Select "Service Centres".
5 Select "Receiving Centres" or "Send Centres".
6 Select "Centre 1".
7 Enter the number for the centre and press "Save".
If there is an incoming call with a number matching with one of these SMS center
numbers, the phone knows it's a call from the SMS center and will take the line
automatically to receive the messages.
SMS
37