Confirming The Completion Of The Installation; Other Information - Sony SU-WL450 Informations D'installation

WARNING
 Be sure that two or more persons hold the TV when
carrying it.
2
Preventing the bottom of the TV
from shifting.
 Take up the slack of Belt  and attach it
to the wall tightly.
2-a

 Use a 5 mm diameter screw or
equivalent (not supplied).
Note
 Try to pull the bottom of the TV forwards yourself
slightly, to make sure that it does not move forward.
If there is any movement, it is not fixed correctly, and
the Belt  should be secured firmly again.
2-b

− 11 (GB) −
Confirming the completion of
the installation
Check the following points.
 The Pulleys  are firmly hung onto the Base
or Base Adaptor.
 The cord and the cable are not twisted or
pinched.
 The Belt  is tight with no slack.
WARNING
 Improper placement of the Mains lead, etc. may cause fire
or electric shock through a short circuit. Be sure to
confirm the completion of the installation for safety.

Other information

When removing the TV, reverse the previous
installation procedure.
WARNING
 Be sure that two or more persons hold the TV when
removing it.
GB