Proxxon MT 300 Mode D'emploi page 9

Instructions for the use of the milling
machine MT 300
Dear Customer,
With the help of these instructions
• you will get to know your machine,
• you will avoid faults resulting from incorrect
use,
• you will learn how to prolong the life of your
machine.
Always keep these instructions ready to hand.
Use this machine in full knowledge of and in
accordance with the instructions.
PROXXON does not accept liability for safe and
sure operation of the machine in the event of:
• manipulations that do not correspond to normal
use,
• use for purposes other than those named in
the instructions,
• failure to observe the safety instructions.
You have no guarantee entitlements in the event
of:
• improper use,
• improper or inadequate maintenance.
For your own safety, do not fail to observe the
safety instructions.
Only use original PROXXON spare parts.
We reserve the right to make further
developments in line with technical progress. We
wish you every success with your machine.
Safety instructions
Use safety equipment. Always wear eye pro-
tection.
Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce the
risk of personal injuries.
- 8 -
Wear a breathing mask when carrying out dust-
generating work
If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce dust related
hazards.
Use only milling cutters recommended by the
manufacturer and which correspond to
EN 847-1.
Overall view (fig. 1):
1. Housing
2. Table
3. Fence
4. Hand wheel for milling cutter height
adjustment
5. On-Off switch
6. Fence clamping screw
7. Cutter shield
8. Clamping screw for cutter shield
9. Milling cutter
10. Fixing holes
11. Extractor connection
12. Spanner holder
13. Angle stop
14. Supply cable
Description of the machine
The MT 300 table milling machine is ideal for
shaping, grooving, chamfering, edging and
taking out.
With the milling cutter running at 25,000 rpm,
clean and precise results with rapid waste
removal are guaranteed.
The cutter height can be adjusted for a wide
range of tasks.
Included in delivery:
1 table milling machine
2 spanners