Güde GRP-6501 B&S Traduction Du Mode D'emploi D'origine page 18

despite that. Watch out for proper aligning and adjustment of any moving parts. Do the parts fit one in
another properly? Are the part damaged? Is everything installed as appropriate? Are any other
prerequisites of proper working in place? Damaged protective devices etc. must be repaired or
replaced by authorised entities unless the operation manual expressly says otherwise. Any defective
switches must be replaced at an authorised servicing centre. Do not use the machine if it cannot be put
on and off with the switch. When repairs are necessary, kindly turn to your local servicing centre.
13. Always switch the engine odd before set-up or maintenance .
14. Use approved components only. Use genuine spare parts for maintenance and repairs; these may
be got in authorised servicing centres.
Warning! Use of parts other than those recommended for use may cause a personal risk and damage of
property .
The machine should be used for the assigned purpose only. Any other use shall be considered
incompetent. Only the user, not in any case the manufacturer, shall be held liable for personal injuries and
damage of property resulting from incompetent use of the machine.
The manufacturer shall not be held liable for damages resulting from alterations made on the machine or
from unskilled handling the machine.
2.1
Emergency Action
Apply the first aid adequate to the injury and get qualified medical assistance as quickly as possible.
Protect the injured person from more accidents and calm him/her down.
2.2
Signs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual and/or on the unit:
Product Safety
Product compliance
with respective EU
standards
GB