Install Bracket; Installation On Walls; Installation Of Hose Or Pipe - Ecolab OGM PLUS Manuel D'utilisation

5.3

Install bracket

Fig. 3: Bracket
1 Shims
PLUS
Fix the OGM
on page 42 and
and shims (pos. 1).
5.4

Installation on walls

WARNING!
The OGM
marked on the cover, since it will only then emit pulses when the volumetric
flow occurs in this direction. Alternatively, the OGM
without brackets directly to an "installation wall", thanks to the spacing of
the threaded holes (
5.5

Installation of hose or pipe

The necessary hose connecting components are not included with the
OGM
from the available accessories (
and accessories' on page 43).
2
1
to the brackets available as accessories (
Ä Chapter 9.2 'Dimensions' on page 42) using suitable bolts (pos. 2)
PLUS
must be installed in accordance with the direction of flow
Ä Chapter 9.2 'Dimensions' on page 42).
PLUS and must be ordered in the correct size (see model designation)
2 Bolts
Ä Chapter 9.2 'Dimensions'
PLUS
Ä Chapter 10 'Ordering code, Spare parts
27
Installation
can also be fixed
417102208 Rev. 8-11.2019