Transport Inspection - Ecolab OGM PLUS Manuel D'utilisation

General points
DANGER!
Danger of commissioning a damaged component by the transport
device
If transport damage is detected when unpacking the system or system
components, you must not install or commission any part of the system.
According to installation / comissioning of an damaged component
uncontrollable error may occur because of the use of aggressive metering
there can be irreparable damage to personnel and / or equipment.

Transport inspection

NOTICE!
Immediately check on receipt of the delivery that it is complete and
free of transport damages.
In case of visible damage, proceed as follows:
n Do not accept the delivery or accept provisionally.
n Note down the extent of damage on the transport documents or on delivery slip.
n Lodging a complaint.
Claim for any damage as soon as you notice it.
Damage claims can only be filed within the applicable period for
complaints.
1.5.2 Packaging
The individual packages are packaged to reflect the expected transport conditions.
Only environmentally-friendly materials were used for the packaging.
The packaging is designed to protect the individual components up to assembly against
shipping damage, corrosion and other damage.
Do not destroy the packaging and only remove it just before assembly.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal.
Packaging materials are valuable raw materials and can, in many cases, be
used again or be usefully processed and recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
– Observe the locally applicable disposal regulations.
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.
417102208 Rev. 8-11.2019 8