Megger LCB2000/2 Guide De L'utilisateur page 34

Operation - Additional Instructions for LCB2500/2 only
Downloading to a PC
Normally, a double-ended 9-way 'D' female socket lead
suitable for connecting PC to PC is required. This lead
should not exceed 3m in length. A lead is available as
an accessory, or one can be made up as follows:-
Signal Installation
Tester
Rx 2
Tx 3
DTR* 4
DSR 6
GND 5
The CD-ROM supplied with the instrument includes
AVO Download Manager which will allow you to retrieve
and edit saved results, and export into other Microsoft
Windows™ packages. Follow instructions supplied with
the disk for further information. The LCB 2500/2 is also
fully compatible with AVO
XPress and NICEone™ certification software.
Printing test results using a serial printer
Normally, a 9-way 'D' female socket to a 25-way 'D'
female socket lead suitable for connecting PC to printer
is required. This lead should not exceed 3m in length. A
lead is available as an optional accessory, or one can
PC
9-way 'D' 25-way 'D'
3 2
2 3
6
4 20
5 7
® PowerSuite™,PowerSuite™
be made up as follows:-
Signal LCB2500/2
Tx 2
DSR 6
GND 5
The printer should be set to 9600 baud, 8 bits data, no
parity and 1 stop bit. This instrument uses a special
isolated serial interface which is powered from the PC
or printer. In the unlikely event that your PC or printer is
not able to power the interface, it will be necessary to
provide an additional supply. Contact AVO Product
Support for details.
Printer
25-way 'D'
2
20
7
33