Leckey Mygo+ Mode D'emploi page 9

SECTION 07.1:
HOW TO ASSEMBLE
YOUR SEATING SYSTEM
The backrest will be folded down for
shipping. Raise it into the vertical position
and, while doing so, slide the inner tube
into the receiving outer tube.
Secure the backrest in an upright position
and tighten the socket cap. Check that it is
secure and does not move when pressure
is applied. If the user thrusts forward or
backwards they could cause injury to
themselves or their carers.
Leckey Mygo+ User Manual p9
Always make sure the
backrest is attached
securely.
Use caution when inserting
inner tube as there could
be possible finger nip.